Rear panels
HP R/T2200 G4 NA/JP UPS
HP R/T3000 G4 LV NA/JP UPS
| 1 |
USB communication port |
| 2 | RS-232 communication port |
| 3 | Connector for automatic recognition of an additional battery module |
| 4 | Slot for optional communication card |
| 5 | Connector for ROO (Remove On/Off) or RPO (Remove Power Off) control |
| 6 | Connector for additional battery module |
| 7 | 30A outlet (L5-30R) for connection of equipment (2U R/T3000 G4 LV NA/JP UPS only) |
| 8a | Group 1: Two programmable outlets for equipment connection |
| 8b | Group 2: Two programmable outlets for equipment connection |
| 9 | Primary Group: outlets for connection of critical equipment |
| 10 |
Attached 8-ft. input power cord for AC power source 5-20P for 2200 L5-30P for 3000 |
| 11 | LED indicating SWF (site wiring fault) alarm (Although the LED remains on the rear panel, this feature is disabled for low voltage models.) |
| 12 | Ground connection |
HP R/T3000 G4 HV NA/JP UPS and HP R/T3000 G4 INTL UPS
| 1 |
USB communication port |
| 2 | RS-232 communication port |
| 3 | Connector for automatic recognition of an additional battery module |
| 4 | Slot for optional communication card |
| 5 | Connector for ROO (Remove On/Off) or RPO (Remove Power Off) control |
| 6 | Connector for additional battery module |
| 7 | 16A outlet for connection of equipment (primary group) |
| 8a | Group 1: Two programmable outlets for equipment connection |
| 8b | Group 2: Two programmable outlets for equipment connection |
| 9 | Primary Group: 4 outlets for connection of critical equipment |
| 10 |
Outlet for connection to AC power source |
| 11 | Ground connection |
HP R/T2200 G4 ERM and HP R/T3000 G4 ERM
(optional battery module)
| 12 | Connectors for battery modules (to the UPS or to the other battery modules) |
| 13 | Connectors for automatic recognition of battery modules |
|
|